Promax 3D Plus 
Provides an extended view of the maxillofacial region, covering even more than the dentition.
Multiple volume sizes and multiple resolutions.
Large 20x10cm volume for Maxillofacial and Zygomatic planning
Large range of volume sizes
Ø200 x 100 mm
Ø200 x 60 mm
Ø160 x 100 mm
Ø100 x 100 mm  Automatic 25% volume reduction for children
Ø100 x 60 mm    Automatic 25% volume reduction for children
Ø80 x 80 mm      Automatic 25% volume reduction for children
Ø80 x 50 mm      Automatic 25% volume reduction for children
Ø40 x 80 mm      Automatic 25% volume reduction for children
Ø40 x 50 mm      Automatic 25% volume reduction for children 

Premium image quality


​Packed with intelligent high-tech solutions and algorithms, all our 3D dental imaging units offer an effortless imaging process and crystal-clear images — also at a low dose.
​
The units have been designed to prevent human errors in CBCT imaging, with options for correcting movement, reducing artefacts and removing noise available. 

Planmeca Ultra Low Dose™

Optimal balance of quality and dose

The pioneering imaging protocol is based on intelligent 3D algorithms that lower effective patient doses significantly without a statistical reduction in image quality – helping clinicians everywhere adhere to the ALARA principle. 

​Ultra Low Dose means that full arch 3D images can now be taken with the equivalent dose of a 2D panoramic image. ​ Ultra Low Dose protocol has proven to be ideal for a wide range of clinical cases: from orthodontics, implant planning and maxillofacial surgery to airway and sinus studies.

Planmeca offer the widest range of specialist imaging and planning options.

Romexis® 3D implantology

The Planmeca Romexis® 3D software has two submodules specifically geared towards implantology – one for virtual implant planning and one for designing surgical guides. Both are simple add-ons to the Romexis 3D module and help users perfect their fully digital implant workflow.
Quality endodontic imaging

With a voxel size of 75 μm, our endodontic imaging mode is ideal for capturing small anatomical details. Even the most difficult treatment areas are clearly visible due to the extremely high resolution.

Innovative movement correction

​Patient movement often poses a challenge to 3D image quality.

Our Planmeca CALM™ algorithm allows you to remove artefacts caused by movement – leading to a much sharper final image.

​Planmeca ProFace®

Planmeca ProFace® is an exclusive 3D face photo option for all our CBCT units. It utilises an integrated camera to produce a realistic 3D face photo and CBCT image in a single session.

You can also take a separate 3D face photo without exposing your patient to any radiation. The results can be used for pre-operative planning and treatment follow-ups, for example.

​3D model scanning

You can use all Planmeca 3D imaging units to scan both impressions and plaster casts – an exciting feature that was an industry first for our units.

​ The digitised models are immediately available in the Planmeca Romexis® imaging software in the standard STL format and also stored for later use. This reduces the need to make or maintain physical plaster casts.

​Ideal for:
•Orthodontic treatment planning
•Pairing with CBCT in Planmeca Romexis for precise implant planning
•Surgical guide manufacturing, no need to send physical plaster model
•Storing impressions and gypsum models digitally in the Planmeca Romexis database

​
Picture
Scan impressions in your Planmeca CBCT
Picture
Scan stone models in your Planmeca CBCT

Advanced ENT imaging

The Planmeca ProMax 3D Plus unit’s voxel sizes range from 600 to 75 μm,

The Planmeca Romexis® software offers versatile tools for visualising airways, sinuses, soft tissues and the smallest bone structures in ears.
Picture
Inner Ear

Romexis® CMF Surgery

The Planmeca Romexis® CMF Surgery module is an advanced orthognathic software for preparing virtual surgical treatment plans.

​It provides surgeons with the means to evaluate cases and to generate intermediate and final splints based on the target occlusion and position of the jaw.

Extensive 2D imaging programs

​Planmeca ProMax units offer the widest variety of imaging programs including
  • Smartpan autofocus panoramics
  • True extra oral bitewings
  • Horizontal and vertical segmenting
  • Child modes for reduced doses and imaging area.
Picture
More clinical data with true extra oral bitewings

Quality cephalometry for orthodontics

​The scanning Planmeca ProMax® scanning cephalostat offers exceptional flexibility for a wide range of image formats. It is available as an additional option for all Planmeca ProMax imaging units.

Low dose imaging

The digital cephalostat scans a patient’s head horizontally using a narrow X-ray beam – ensuring an extremely low effective patient dose.

Extended selection of field sizes

​​Extended selection of field sizesThe Planmeca ProMax scanning cephalostat offers exceptional flexibility, with field sizes all the way up to 30 x 27 cm.

In depth information

Promax 3D Plus Brochure

From a very small 3 x 4cm volume to
a large 20cm x 10cm volume

Romexis - The only All in One imaging software

Romexis integrates 2D, 3D, Smile Design, Implant planning,
3D Printing, CADCAM and many more tools into one imaging software.
CONTACT US
Copyright Digital Dental Ltd © 2019
Promax 3D Plus 
Provides an extended view of the maxillofacial region, covering even more than the dentition.
Multiple volume sizes and multiple resolutions.
Large 20x10cm volume for Maxillofacial and Zygomatic planning
Large range of volume sizes
Ø200 x 100 mm
Ø200 x 60 mm
Ø160 x 100 mm
Ø100 x 100 mm  Automatic 25% volume reduction for children
Ø100 x 60 mm    Automatic 25% volume reduction for children
Ø80 x 80 mm      Automatic 25% volume reduction for children
Ø80 x 50 mm      Automatic 25% volume reduction for children
Ø40 x 80 mm      Automatic 25% volume reduction for children
Ø40 x 50 mm      Automatic 25% volume reduction for children 

Premium image quality


​Packed with intelligent high-tech solutions and algorithms, all our 3D dental imaging units offer an effortless imaging process and crystal-clear images — also at a low dose.
​
The units have been designed to prevent human errors in CBCT imaging, with options for correcting movement, reducing artefacts and removing noise available. 

Planmeca Ultra Low Dose™

Optimal balance of quality and dose

The pioneering imaging protocol is based on intelligent 3D algorithms that lower effective patient doses significantly without a statistical reduction in image quality – helping clinicians everywhere adhere to the ALARA principle. 

​Ultra Low Dose means that full arch 3D images can now be taken with the equivalent dose of a 2D panoramic image. ​ Ultra Low Dose protocol has proven to be ideal for a wide range of clinical cases: from orthodontics, implant planning and maxillofacial surgery to airway and sinus studies.

Planmeca offer the widest range of specialist imaging and planning options.

Romexis® 3D implantology

The Planmeca Romexis® 3D software has two submodules specifically geared towards implantology – one for virtual implant planning and one for designing surgical guides. Both are simple add-ons to the Romexis 3D module and help users perfect their fully digital implant workflow.
Quality endodontic imaging

With a voxel size of 75 μm, our endodontic imaging mode is ideal for capturing small anatomical details. Even the most difficult treatment areas are clearly visible due to the extremely high resolution.

Innovative movement correction

​Patient movement often poses a challenge to 3D image quality.

Our Planmeca CALM™ algorithm allows you to remove artefacts caused by movement – leading to a much sharper final image.

​Planmeca ProFace®

Planmeca ProFace® is an exclusive 3D face photo option for all our CBCT units. It utilises an integrated camera to produce a realistic 3D face photo and CBCT image in a single session.

You can also take a separate 3D face photo without exposing your patient to any radiation. The results can be used for pre-operative planning and treatment follow-ups, for example.

​3D model scanning

You can use all Planmeca 3D imaging units to scan both impressions and plaster casts – an exciting feature that was an industry first for our units.

​ The digitised models are immediately available in the Planmeca Romexis® imaging software in the standard STL format and also stored for later use. This reduces the need to make or maintain physical plaster casts.

​Ideal for:
•Orthodontic treatment planning
•Pairing with CBCT in Planmeca Romexis for precise implant planning
•Surgical guide manufacturing, no need to send physical plaster model
•Storing impressions and gypsum models digitally in the Planmeca Romexis database

​
Picture
Scan impressions in your Planmeca CBCT
Picture
Scan stone models in your Planmeca CBCT

Advanced ENT imaging

The Planmeca ProMax 3D Plus unit’s voxel sizes range from 600 to 75 μm,

The Planmeca Romexis® software offers versatile tools for visualising airways, sinuses, soft tissues and the smallest bone structures in ears.
Picture
Inner Ear

Romexis® CMF Surgery

The Planmeca Romexis® CMF Surgery module is an advanced orthognathic software for preparing virtual surgical treatment plans.

​It provides surgeons with the means to evaluate cases and to generate intermediate and final splints based on the target occlusion and position of the jaw.

Extensive 2D imaging programs

​Planmeca ProMax units offer the widest variety of imaging programs including
  • Smartpan autofocus panoramics
  • True extra oral bitewings
  • Horizontal and vertical segmenting
  • Child modes for reduced doses and imaging area.
Picture
More clinical data with true extra oral bitewings

Quality cephalometry for orthodontics

​The scanning Planmeca ProMax® scanning cephalostat offers exceptional flexibility for a wide range of image formats. It is available as an additional option for all Planmeca ProMax imaging units.

Low dose imaging

The digital cephalostat scans a patient’s head horizontally using a narrow X-ray beam – ensuring an extremely low effective patient dose.

Extended selection of field sizes

​​Extended selection of field sizesThe Planmeca ProMax scanning cephalostat offers exceptional flexibility, with field sizes all the way up to 30 x 27 cm.

In depth information

Promax 3D Plus Brochure

From a very small 3 x 4cm volume to
a large 20cm x 10cm volume

Romexis - The only All in One imaging software

Romexis integrates 2D, 3D, Smile Design, Implant planning,
3D Printing, CADCAM and many more tools into one imaging software.
CONTACT US